Summer is an ideal time for homeowners to relax in their patio. However, it is also an ideal time to ensure it is in excellent condition. It is best to look over your concrete patio for any issues once the cold and snow are gone.
Maintenance is a lot easier in summer compared to winter when it comes to stamped concrete. Today, we are going to share with you a couple of tips in preparing your stamped concrete Utah for summer.
Should You Reseal the Surface?
Early summer and spring are also ideal times to reseal your driveway and patio. Normally, this should take place every 3 years.
The ideal option for you is a natural penetrating sealer. The reason for this is that it behaves and resembles natural stone. Aside from that, it is also much more affordable. You can purchase this sealer at your local home improvement shop if you want to do the sealing as a DIY project.
To effectively apply the sealer, you require warm weather. You should not apply in a hot weather. Also, you have to apply it to dry concrete. You’ve got to ensure the surface is completely dry and that you’ve got several days of clear weather. This will allow the sealer to completely dry.
Look for Cracks
You should look for any cracks that appear in the concrete once winter is gone. Of course, cracking does not only happen over winter. It can happen at any season. In places where there’s no thaw-freeze cycle, extreme heat changes can be worse.
But, summer and spring are an ideal time to search for any problems that have settled over the previous months. In the winter and fall, you’ve got to deal with snow and leaves. This makes problems a bit more difficult to find. However, once these things are gone, you can easily notice any minor cracks that might have formed.
If your stamped concrete is installed properly, most cracks can be prevented. However, minor cracks can still appear. Keep in mind that they might only be noticeable after it rains because they have a tendency to slowly dry compared to other places.
Preventing Winter Damage
It is vital to prevent salt when you want to melt snow. For those who don’t know, salt can damage the concrete and the sealer. You should also avoid other products such as Polar Ice an Alaskan Melt since these can cause damages to your concrete.
The 1st thaw-freeze cycle for the concrete is especially vital. Unless it is really required, you should not utilize any de-icing products during this time.
Getting rid of snow before any cars drive on the surface is the most vital aspect of the winter. You won’t have to use any de-icing materials if you get rid of the snow before you drive your car on the surface. The concrete won’t be slippery after you get rid of the snow. Only use de-icing products if it is really needed since it can damage your stamped concrete.